 Descargar datos tecnicos |
Ir a menu productos |
 Alianzas estrtegicas |
Solicitar cotización |
Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/Montevideo' for 'UYT/-3.0/no DST' instead in /home/www/commandlinesolutions/public_html/libraries/joomla/utilities/date.php on line 198
- Redfone BRIDGE1
- Redfone BRIDGE 2 -EC
- Redfone BRIDGE2
Redfone’s fonebridge is a Quad T1/E1 to Ethernet Bridge. It represents an architectural paradigm shift in Asterisk implementation. To Asterisk™, fonebridge appears to be a standard T1 or E1 card, but since it’s actually an independent appliance, it facilitates installation and enables scalable, redundant system design never before possible.
Simplifies Installation True Plug & Play hardware Simplifies cabling; place it wherever is most convenient Uses power over Ethernet; no wall-mount adapters Leverages commodity servers; no need for a certified box Eliminates requirement for proprietary TDM cards Fully Asterisk Compatible Employs native Asterisk™ TDMoE format and utilities Follows standard Asterisk™ configuration rules and syntax Compatible with PRI connections and channel banks Improves Reliability, Facilitates Redundancy & Scalability Solid state appliance with no moving parts Low power consumption, high MTBF Slashes overall Asterisk™ server load Share across multiple redundant servers Get on-demand system scalability - just add fonebridges Easily “add 9s” to your 99.xx% system availability!
Telephony PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS 100, Lucent 5E, NI1/NI2; Network or CPE Line Interface– Dual or Quad T1/E1 (RJ45), per port configurable Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1 Super Frame (SF) and Extended Super Frame (ESF) Robbed Bit Signaling (RBS/CAS) Short and Long Haul line build out (LBO) Adaptive Equalizer for line attenuation conditioning Echo Cancellation On-board high speed digital signal processing with TI’s 6000™ DSP platform Adaptive Digital “carrier class” G.168.v8 patented echo canceller 128ms (1024 taps) of echo tail Comfort Noise Generator Automatic tail search, fast convergence, and no divergence due to double talk Tone disabler for clear fax and modem communication Ethernet 10/100-BASE-TX Half/Full-duplex 2 x Dedicated RJ45 Specifications
Failover & Asterisk HA Enabled High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available Flexible Configuration Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment. Field upgradeable. Solid State Embedded Appliance No moving components Low heat and power consumption High MTBF (mean time before failure) Carrier Class Echo Cancellation ITU G.168 Compliant 128ms of echo tail up to 120 concurrent channels Qualified as Toll Quality by AT&T
10/100-BASE-TX Half/Full-duplex 2 x Dedicated RJ45 PRI Switch Compatibility– EuroISDN, AT&T 4ESS, DMS 100, Lucent 5E, NI1/NI2; Network or CPE Line Interface– Dual or Quad T1/E1 (RJ45), per port configurable Line Encoding– AMI/B8ZS for T1, AMI/HDB3 for E1 Super Frame (SF) and Extended Super Frame (ESF) Robbed Bit Signaling (RBS/CAS) T1/E1 PRI Trunk termination Legacy PBX-to-Asterisk integration High-Availability/Failover Asterisk clusters Channel Bank connectivity Mixed telephony environments (ex. E1 PRIs + T1 Channel banks)
Enables T1/E1 Load Balancing Share trunk resources among multiple Asterisk servers through the load balancing capabilities of foneBRIDGE2 Failover & Asterisk HA Enabled High-Availability through rapid failover capabilities ensures your critical telephony services are always on and available Flexible Configuration Configurable on a per-port basis, foneBRIDGE2 allows you to mix multiple telephony standards on a single deployment Solid State Embedded Appliance No moving components Low heat and power consumption High MTBF (mean time before failure)
